Thermal and mechanical properties of chitosan nanocomposites with cellulose modified in ionic liquids

In this paper, ionic liquid treatment was applied to produce nanometric cellulose particles of two polymorphic forms. A complex characterization of nanofillers including wide-angle X-ray scattering, Fourier transform infrared spectroscopy, and particle size determination was performed. The evaluated ionic liquid treatment was effective in terms of nanocrystalline cellulose production, leaving chemical and supermolecular structure of the materials intact. However, nanocrystalline cellulose II was found to be more prone to ionic liquid hydrolysis leading to formation larger amount of small particles. Each nanocrystalline cellulose was subsequently mixed with a solution of chitosan, so that composite films containing 1, 3, and 5% mass/mass of nanometric filler were obtained. Reference samples of chitosan and chitosan with micrometric celluloses were also solvent casted. Thermal, mechanical, and morphological properties of films were tested and correlated with properties of filler used. The results of both, tensile tests and thermogravimetric analysis showed a significant discrepancy between composites filled with nanocrystalline cellulose I and nanocrystalline cellulose II

Comparison of [HSO4](-), [Cl](-) and [MeCO2](-) as anions in pretreatment of aspen and spruce with imidazolium-based ionic liquids

Background: Ionic liquids (ILs) draw attention as green solvents for pretreatment of lignocellulose before enzymatic saccharification. Imidazolium-based ILs with different anionic constituents ([HSO4]−, [Cl]−, [MeCO2]−) were compared with regard to pretreatment of wood from aspen and spruce. The objective was to elucidate how the choice of anionic constituent affected the suitability of using the IL for pretreatment of hardwood, such as aspen, and softwood, such as spruce. The investigation covered a thorough analysis of the mass balance of the IL pretreatments, the effects of pretreatment on the cell wall structure as assessed by fluorescence microscopy, and the effects of pretreatment on the susceptibility to enzymatic saccharification. Torrefied aspen and spruce were included in the comparison for assessing how shifting contents of hemicelluloses and Klason lignin affected the susceptibility of the wood to IL pretreatment and enzymatic saccharification. Results: The glucose yield after IL pretreatment increased in the order [Cl]− < [HSO4]− < [MeCO2]− for aspen, but in the order [HSO4]− < [Cl]− < [MeCO2]− for spruce. For both aspen and spruce, removal of hemicelluloses and lignin increased in the order [Cl]− < [MeCO2]− < [HSO4]−. Fluorescence microscopy indicated increasingly disordered cell wall structure following the order [HSO4]− < [Cl]− < [MeCO2]−. Torrefaction of aspen converted xylan to pseudo-lignin and changed the glucose yield order to [HSO4]− < [Cl]− < [MeCO2]−. Conclusions: The acidity of [HSO4]− caused extensive hydrolysis of xylan, which facilitated pretreatment of xylan-rich hardwood. Apart from that, the degree of removal of hemicelluloses and lignin did not correspond well with the improvement of the enzymatic saccharification. Taken together, the saccharification results were found to mainly reflect (i) the different capacities of the ILs to disorder the cell wall structure, (ii) the recalcitrance caused by high xylan content, and (iii) the capacity of the [HSO4]−-based IL to hydrolyze xylan.Bio4Energ

Biochemical Conversion of Torrefied Norway Spruce After Pretreatment with Acid or Ionic Liquid

The chemical effects of torrefaction and the possibility to combine torrefaction with biochemical conversion were explored in experiments with five preparations of wood of Norway spruce that had been torrefied using different degrees of severity. Compositional analysis and analyses using solid-state CP/MAS C-13 NMR, Fourier-transform infrared (FTIR) spectroscopy, and Py-GC/MS showed small gradual changes, such as decreased hemicellulosic content and increased Klason lignin value, for torrefaction conditions in the range from 260 A degrees C and 8 min up to 310 A degrees C and 8 min. The most severe torrefaction conditions (310 A degrees C, 25 min) resulted in substantial loss of glucan and further increase of the Klason lignin value, which was attributed to conversion of carbohydrate to pseudo-lignin. Even mild torrefaction conditions led to decreased susceptibility to enzymatic hydrolysis of cellulose, a state which was not changed by pretreatment with sulfuric acid. Pretreatment with the ionic liquid (IL) 1-butyl-3-methylimidazolium acetate overcame the additional recalcitrance caused by torrefaction, and the glucose yields after 72 h of enzymatic hydrolysis of wood torrefied at 260 A degrees C for 8 min and at 285 A degrees C for 16.5 min were as high as that of IL-pretreated non-torrefied spruce wood. Compared to IL-pretreated non-torrefied reference wood, the glucose production rates after 2 h of enzymatic hydrolysis of IL-pretreated wood torrefied at 260 A degrees C for 8 min and at 285 A degrees C for 16.5 min were 63 and 40 % higher, respectively. The findings offer increased understanding of the effects of torrefaction and indicate that mild torrefaction is compatible with biochemical conversion after pretreatment with alternative solvents that disrupt pseudo-lignin-containing lignocellulose.Bio4Energ